Mudding Still....

It's been a while since I've posted a proper blog entry, but unfortunately there isn't too much to write about. I made a push a few weekends ago to get this mudding done and was quite successful at getting the two base coats on almost everything. Yet, summer has been calling still and my August and early September have been filled with long weekends away sailing, the New Jersey shore and Michigan. Top that off with a large explosion of business at the office and I've been screwed out of doing much work at home rolling in around 9 PM. Remember, each batch of this mud takes 1 hour or apply!

Yet, there have been many accomplishments. All the plaster is off of the brick around the door and has been scrubbed free of dusty plaster. The drywall in the foyer in the few spots it was missing is up. Lots of documentation, such as stud locations, has occured as well as a rigorous pricing exercise for the kitchen (still going though). Again, thanks to the friends who helped with these little tasks. You know who you are.

With that said, I made another small push again this weekend and will do so again in 2 weekends to finish up mudding. Switching over to the lightweight mud wich is meant for sanding, I had to slightly re-learn my technique. The goal with this coat is to feather out the edge so it appears smooth and there aren't any mud 'bumps' visible on the walls. I think I'm doing OK, but the true test will be when the paint goes on.

The adventure of the weekend was putting the drywall onto the plaster in the closets. Rather then chip all of this off the brick wall (adjoining with the hallway) or skim coat over it, the executive decision was made to mount the drywall on top of the plaster on brick. Although I lose 1/2" by doing this it will make the wall texture consistent...and it saves me the time of learning how to skim coat, etc. Using trusty PL200 construction glue and a makeshift mounting system the drywall went up and is staying in place and should be stuck there tomorrow.